Exhaust - Downpipe

I started on the exhaust. I began by getting the first 90 degrees to fit correctly, and then welded it all together. I welded on the inside of the flange as Corky Bell suggests, and then added a few inch wide welds on the outside.

I added a v-band to the end of that, and began the actual downpipe, which I thought was going to be hard with all the objects I had to avoid. It turned out pretty easy to do:

And that gets it to the transmission. Now there's about 20cm of distance left to cover to get it to match up to old exhaust. This downpipe is all stainless, but the old exhaust is mild (and showing it). I don't plan on keeping the old exhaust too long so I'm not too worried.